Pages

Saturday, October 31, 2015

E-mail

                                              E-mail
                                         
                                                E-mail, most commonly called email or e-mail since around 1993, is a method of exchanging digital messages from an author to one or more recipients. E-mail is short form its full form is "electronic mail". Email operates across the Internet or other computer networks. Some early email systems required the author and the recipient to both is online at the same time, in common with instant messaging. Today's email systems are based on a store-and-forward model. Email servers accept, forward, deliver, and store messages. Neither the users nor their computers are required to be online simultaneously; they need connect only briefly, typically to a mail server, for as long as it takes to send or receive messages. Popular email platforms include Gmail, Hotmail, Yahoo! Mail, Outlook, and many others. Historically, the term electronic mail was used generically for any electronic document transmission. For example, several writers in the early 1970s used the term to describe fax document transmission.
As a result, it is difficult to find the first citation for the use of the term with the more specific meaning it has today. An Internet email message consists of three components, the message envelope, the message header, and the message body. The message header contains control information, including, minimally, an originator's email address and one or more recipient addresses. Usually descriptive information is also added, such as a subject header field and a message submission date/time stamp.
Originally an ASCII text-only communications medium, Internet email was extended by Multipurpose Internet Mail Extensions (MIME) to carry text in other character sets and multi-media content attachments. International email, with internationalized email addresses using UTF-8, has been standardized, but not yet widely adopted. Electronic mail predates the inception of the Internet and was in fact a crucial tool in creating it, but the history of modern, global Internet email services reaches back to the early ARPANET. Standards for encoding email messages were proposed as early as 1973 (RFC 561). Conversion from ARPANET to the Internet in the early 1980s produced the core of the current services. An email message sent in the early 1970s looks quite similar to a basic text message sent on the Internet today. Email is an information and communications technology. It uses technology to communicate a digital message over the Internet. Users use email differently, based on how they think about it. There are many software platforms available to send and receive.
Network-based email was initially exchanged on the ARPANET in extensions to the File Transfer Protocol (FTP), but is now carried by the Simple Mail Transfer Protocol (SMTP), first published as Internet standard 10 (RFC 821) in 1982. In the process of transporting email messages between systems, SMTP communicates delivery parameters using a message envelope separate from the message (header and body) itself.

Spelling

Electronic mail has several English spelling options:
E-mail is the most common form used online, and is required by IETF Requests for Comments and working groups and increasingly by style guides. This spelling also appears in most dictionaries. E-mail has long been the form that appears most frequently in edited, published American English and British English writing as reflected in the Corpus of Contemporary American English data and style guides. Mail was the form used in the original RFC. The service is referred to as mail, and a single piece of electronic mail is called a message. E-Mail is a traditional form that has been used in RFCs for the "Author's Address" and is expressly required "for historical reasons". E-mail is sometimes used, capitalizing the initial E as in similar abbreviations like E-piano, E-guitar, A-bomb, and H-bomb.

Origin

The AUTODIN network, first operational in 1962, provided a message service between 1,350 terminals, handling 30 million messages per month, with an average message length of approximately 3,000 characters. Autodin was supported by 18 large computerized switches, and was connected to the United States General Services Administration Advanced Record System, which provided similar services to roughly 2,500 terminals.
Host-based mail systems
With the introduction of MIT's Compatible Time-Sharing System (CTSS) in 1961 multiple users were able to log into a central system from remote dial-up terminals, and to store and share files on the central disk. Informal methods of using this to pass messages were developed and expanded :
Developers of other early systems developed similar email applications:
1962 – 1440/1460 Administrative Terminal System
 1968 – ATS/360
1971 – SNDMSG, a local inter-user mail program incorporating the experimental file transfer program, CPYNET, allowed the first networked electronic mail
 1972 – Unix mail program
 1972 – APL Mailbox by Larry Breed
 1974 – The PLATO IV Notes on-line message board system was generalized to offer 'personal notes' in August 1974.
   1978 – Mail client written by Kurt Shoens for Unix and distributed with the Second Berkeley Software Distribution included support for aliases and distribution lists, forwarding, formatting messages, and accessing different mailboxes. It used the Unix mail client to send messages between system users. The concept was extended to communicate remotely over the Berkley Network.
1979 – EMAIL written by V.A. Shiva Ayyadurai to emulate the interoffice mail system of the University of Medicine and Dentistry of New Jersey.
1979 – MH Message Handling System developed at RAND provided several tools for managing electronic mail on UNIX.
1981 – PROFS by IBM
1982 – ALL-IN-1 by Digital Equipment Corporation
These original messaging systems had widely different features and ran on systems that were incompatible with each other. Most of them only allowed communication between users logged into the same host or "mainframe", although there might be hundreds or thousands of users within an organization.
LAN email systems
In the early 1980s, networked personal computers on LANs became increasingly important. Server-based systems similar to the earlier mainframe systems were developed. Again, these systems initially allowed communication only between users logged into the same server infrastructure. Examples include:

cc:Mail
Lantastic
Word Perfect Office
Microsoft Mail
Banyan VINES
Lotus Notes
Eventually these systems too could link different organizations as long as they ran the same email system and proprietary protocol.
Email networks
To facilitate electronic mail exchange between remote sites and with other organizations, telecommunication links, such as dial up modems or leased lines, provided means to transport email globally, creating local and global networks.  In 1971 the first ARPANET email was sent, and through RFC 561, RFC 680, RFC 724, and finally 1977's RFC 733, became a standardized working system. PLATO IV was networked to individual terminals over leased data lines prior to the implementation of personal notes in 1974. UNIX mail was networked by 1978's, which was also used for USENET newsgroup postings, with similar headers.
From SNDMSG to MSG
In the early 1970s, Ray Tomlinson updated an existing utility called SNDMSG so that it could copy messages (as files) over the network. Lawrence Roberts The project manager for the ARPANET development, took the idea of READMAIL, which dumped all "recent" messages onto the user's terminal, and wrote a programmed for TENEX in TECO macros called RD, which permitted access to individual messages. Barry Wessler then updated RD and called it NRD. Marty Yonke rewrote NRD to include reading, access to SNDMSG for sending, and a help system, and called the utility WRD, which was later known as BANANARD. John Vittal then updated this version to include three important commands: Move (combined save/delete command), Answer (determined to whom a reply should be sent) and Forward (sent an email to a person who was not already a recipient). The system was called MSG. With inclusion of these features, MSG is considered to be the first integrated modern email programmed, from which many other applications have descended.

ARPANET Mail

Experimental email transfers between separate computer systems began shortly after the creation of the ARPANET in 1969. Ray Tomlinson is generally credited as having sent the first email across a network, initiating the use of the "@" sign to separate the names of the user and the user's machine in 1971, when he sent a message from one Digital Equipment Corporation DEC-10 computer to another DEC-10. The two machines were placed next to each other. Tomlinson's work was quickly adopted across the ARPANET, which significantly increased the popularity of email. Initially addresses were of the form, username@hostname but were extended to "username@host.domain" with the development of the Domain Name System (DNS).
As the influence of the ARPANET spread across academic communities, gateways were developed to pass mail to and from other networks such as CSNET, JANET, BITNET, X.400, and FidoNet. This often involved addresses such as:
hubhost!middlehost!edgehost!user@uucpgateway.somedomain.example.com
Which routes mail to a user with a "bang path" address at a UUCP host. The diagram to the right shows a typical sequence of events that takes place when sender Alice transmits a message using a mail user agent (MUA) addressed to the email address of the recipient.

Email operation

The MUA formats the message in email format and uses the submission protocol, a profile of the Simple Mail Transfer Protocol (SMTP), to send the message to the local mail submission agent (MSA), in this case smtp.a.org.
    The MSA determines the destination address provided in the SMTP protocol (not from the message header), in this case bob@b.org. The part before the @ sign is the local part of the address, often the username of the recipient, and the part after the @ sign is a domain name. The MSA resolves a domain name to determine the fully qualified domain name of the mail server in the Domain Name System (DNS). The DNS server for the domain b.org (ns.b.org) responds with any MX records listing the mail exchange servers for that domain, in this case mx.b.org, a message transfer agent (MTA) server run by the recipient's ISP. Smtp.a.org sends the message to mx.b.org using SMTP. This server may need to forward the message to other MTAs before the message reaches the final message delivery agent (MDA). The MDA delivers it to the mailbox of user bob. Bob's MUA picks up the message using either the Post Office Protocol (POP3) or the Internet Message Access Protocol (IMAP).
In addition to this example, alternatives and complications exist in the email system:
Alice or Bob may use a client connected to a corporate email system, such as IBM Lotus Notes or Microsoft Exchange. These systems often have their own internal email format and their clients typically communicate with the email server using a vendor-specific, proprietary protocol. The server sends or receives email via the Internet through the product's Internet mail gateway which also does any necessary reformatting. If Alice and Bob work for the same company, the entire transaction may happen completely within a single corporate email system. Alice may not have a MUA on her computer but instead may connect to a webmail service. Alice's computer may run its own MTA, so avoiding the transfer at step 1. Bob may pick up his email in many ways, for example logging into mx.b.org and reading it directly, or by using a webmail service. Many MTAs used to accept messages for any recipient on the Internet and do their best to deliver them. Such MTAs are called open mail relays. This was very important in the early days of the Internet when network connections were unreliable. However, this mechanism proved to be exploitable by originators of unsolicited bulk email and as a consequence open mail relays have become rare, and many MTAs do not accept messages from open mail relays.

Message format

The Internet email message format is now defined by RFC 5322, with multi-media content attachments being defined in RFC 2045 through RFC 2049, collectively called Multipurpose Internet Mail Extensions or MIME. RFC 5322 replaced the earlier RFC 2822 in 2008, and in turn RFC 2822 in 2001 replaced RFC 822 – which had been the standard for Internet email for nearly 20 years. Published in 1982, RFC 822 was based on the earlier RFC 733 for the ARPANET. Internet email messages consist of two major sections, the message header and the message body. The header is structured into fields such as From, To, CC, Subject, Date, and other information about the email. The body contains the message, as unstructured text, sometimes containing a signature block at the end. The header is separated from the body by a blank line.
Message header
Each message has exactly one header, which is structured into fields. Each field has a name and a value. RFC 5322 specifies the precise syntax. Informally, each line of text in the header that begins with a printable character begins a separate field. The field name starts in the first character of the line and ends before the separator character ":". The separator is then followed by the field value (the "body" of the field). The value is continued onto subsequent lines if those lines have a space or tab as their first character. Field names and values are restricted to 7-bit ASCII characters. Non-ASCII values may be represented using MIME encoded words.
Header fields
Email header fields can be multi-line, and each line should be at most 78 characters long and in no event more than 998 characters long. Header fields defined by RFC 5322 can only contain US-ASCII characters; for encoding characters in other sets, a syntax specified in RFC 2047 can be used. Recently the IETF EAI working group has defined some standards track extensions, replacing previous experimental extensions, to allow UTF-8 encoded Unicode characters to be used within the header. In particular, this allows email addresses to use non-ASCII characters. Such characters must only be used by servers that support these extensions.
The message header must include at least the following fields:
From: The email address, and optionally the name of the author(s). In many email clients not changeable except through changing account settings.
Date: The local time and date when the message was written. Like the From: field, many email clients fill this in automatically when sending. The recipient's client may then display the time in the format and time zone local to him/her.
The message header should include at least the following fields:
  Message-ID: Also an automatically generated field; used to prevent multiple deliveries and for reference in In-Reply-To: (see below). In-Reply-To: Message-ID of the message that this is a reply to. Used to link related messages together. This field only applies for reply messages. RFC 3864 describes registration procedures for message header fields at the IANA; it provides for permanent and provisional message header field names, including also fields defined for MIME, Netnews, and http, and referencing relevant RFCs. Common header fields for email include:

 To: The email addresses (es), and optionally name(s) of the message's recipient(s). Indicates primary recipients (multiple allowed), for secondary recipients see Cc: and Bcc: below.
   Subject: A brief summary of the topic of the message. Certain abbreviations are commonly used in the subject, including "RE:" and "FW:".
  Bcc: Blind carbon copy; addresses added to the SMTP delivery list but not (usually) listed in the message data, remaining invisible to other recipients.
  Cc: Carbon copy; Many email clients will mark email in one's inbox differently depending on whether they are in the To: or Cc: list.
    Content-Type: Information about how the message is to be displayed, usually a MIME type.
    Precedence: commonly with values "bulk", "junk", or "list"; used to indicate that automated "vacation" or "out of office" responses should not be returned for this mail, e.g. to prevent vacation notices from being sent to all other subscribers of a mailing list. Send mail uses this header to affect prioritization of queued email, with "Precedence: special-delivery" messages delivered sooner. With modern high-bandwidth networks delivery priority is less of an issue than it once was. Microsoft Exchange respects a fine-grained automatic response suppression mechanism, the X-Auto-Response-Suppress header.
    References: Message-ID of the message that this is a reply to, and the message-id of the message the previous reply were a reply to, etc.
    Reply-To: Address that should be used to reply to the message.
    Sender: Address of the actual sender acting on behalf of the author listed in the from: field (secretary, list manager, etc.).
    Archived-At: A direct link to the archived form of an individual email message.

Note that the to: field is not necessarily related to the addresses to which the message is delivered. The actual delivery list is supplied separately to the transport protocol, SMTP, which may or may not originally have been extracted from the header content. The "To:" field is similar to the addressing at the top of a conventional letter which is delivered according to the address on the outer envelope. In the same way, the "From:" field does not have to be the real sender of the email message. Some mail servers apply email authentication systems to messages being relayed. Data pertaining to server's activity is also part of the header, as defined below.
SMTP defines the trace information of a message, which is also saved in the header using the following two fields:
Received: when an SMTP server accepts a message it inserts this trace record at the top of the header (last to first).
Return-Path: when the delivery SMTP server makes the final delivery of a message, it inserts this field at the top of the header.
Other header fields that are added on top of the header by the receiving server may be called trace fields, in a broader sense. Authentication-Results: when a server carries out authentication checks, it can save the results in this field for consumption by downstream agents. Received-SPF: stores results of SPF checks in more detail than Authentication-Results. Auto-Submitted: is used to mark automatically generated messages.
  VBR-Info: claims VBR whitelisting

Message body

Content encoding: Email was originally designed for 7-bit ASCII. Most email software is 8-bit clean but must assume it will communicate with 7-bit servers and mail readers. The MIME standard introduced character set specifies and two content transfer encodings to enable transmission of non-ASCII data: quoted printable for mostly 7 bit content with a few characters outside that range and base64 for arbitrary binary data. The 8BITMIME and BINARY extensions were introduced to allow transmission of mail without the need for these encodings, but many mail transport agents still do not support them fully. In some countries, several encoding schemes coexist; as the result, by default, the message in a non-Latin alphabet language appears in non-readable form (the only exception is coincidence, when the sender and receiver use the same encoding scheme). Therefore, for international character sets, Unicode is growing in popularity.
Plain text and HTML
Most modern graphic email clients allow the use of either plain text or HTML for the message body at the option of the user. HTML email messages often include an automatically generated plain text copy as well, for compatibility reasons.
Advantages of HTML include the ability to include in-line links and images, set apart previous messages in block quotes, wrap naturally on any display, use emphasis such as underlines and italics, and change font styles. Disadvantages include the increased size of the email, privacy concerns about web bugs, abuse of HTML email as a vector for phishing attacks and the spread of malicious software. Some web based mailing lists recommend that all posts be made in plain-text, with 72 or 80 characters per line for all the above reasons, but also because they have a significant number of readers using text-based email clients such as Mutt. Microsoft email clients allow rich formatting using their proprietary Rich Text Format (RTF), but this should be avoided unless the recipient is guaranteed to have a compatible email client.

Servers and client applications

Messages are exchanged between hosts using the Simple Mail Transfer Protocol with software programs called mail transfer agents (MTAs); and delivered to a mail store by programs called mail delivery agents (MDAs, also sometimes called local delivery agents, LDAs). Users can retrieve their messages from servers using standard protocols such as POP or IMAP, or, as is more likely in a large corporate environment, with a proprietary protocol specific to Novell GroupWise, Lotus Notes or Microsoft Exchange Servers. Webmail interfaces allow users to access their mail with any standard web browser, from any computer, rather than relying on an email client. Programs used by users for retrieving, reading, and managing email are called mail user agents (MUAs).
Mail can be stored on the client, on the server side, or in both places. Standard formats for mailboxes include Maildir and mbox. Several prominent email clients use their own proprietary format and require conversion software to transfer email between them. Server-side storage is often in a proprietary format but since access is through a standard protocol such as IMAP, moving email from one server to another can be done with any MUA supporting the protocol.
Accepting a message obliges an MTA to deliver it, and when a message cannot be delivered, that MTA must send a bounce message back to the sender, indicating the problem.
Filename extensions
Upon reception of email messages, email client applications save messages in operating system files in the file system. Some clients save individual messages as separate files, while others use various database formats, often proprietary, for collective storage. A historical standard of storage is the mbox format. The specific format used is often indicated by special filename extensions:
eml
    Used by many email clients including Novell GroupWise, Microsoft Outlook Express, Lotus notes, Windows Mail, Mozilla Thunderbird, and Postbox. The files are plain text in MIME format, containing the email header as well as the message contents and attachments in one or more of several formats.
emlx
    Used by Apple Mail.
msg
    Used by Microsoft Office Outlook and Office Logic Groupware.
mbx
    Used by Opera Mail, KMail, and Apple Mail based on the mbox format.
Some applications (like Apple Mail) leave attachments encoded in messages for searching while also saving separate copies of the attachments. Others separate attachments from messages and save them in a specific directory.
Mobile devices, such as smart cell phones and tablet computers, commonly have the ability to receive email. Since users may always have their mobile device with them, users may access email significantly faster on these devices than through other methods, such as desktop computers or laptops.

URI scheme mailto

The URI scheme, as registered with the IANA, defines the mailto: scheme for SMTP email addresses. Though its use is not strictly defined, URLs of this form are intended to be used to open the new message window of the user's mail client when the URL is activated, with the address as defined by the URL in the To: field.

Types

Web-based email:
 Many email providers have a web-based email client (e.g. AOL Mail, Gmail, Outlook.com and Yahoo! Mail). This allows users to log into the email account by using any compatible web browser to send and receive their email. Mail is typically not downloaded to the client, so can't be read without a current Internet connection.
POP3 email services. The Post Office Protocol 3 (POP3) is a mail access protocol used by a client application to read messages from the mail server. Received messages are often deleted from the server. POP supports simple download-and-delete requirements for access to remote mailboxes (termed mail drop in the POP RFC's).
IMAP email servers
The Internet Message Access Protocol (IMAP) provides features to manage a mailbox from multiple devices. Small portable devices like Smartphone's are increasingly used to check email while travelling, and to make brief replies, larger devices with better keyboard access being used to reply at greater length. IMAP shows the headers of messages, the sender and the subject and the device needs to request to download specific messages. Usually mail is left in folders in the mail server.
MAPI email servers
Messaging Application Programming Interface (MAPI) is a messaging architecture and an API based on the Component Object Model (COM) for Microsoft Windows.

Uses of e-mail
This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Flaming
Flaming occurs when a person sends a message with angry or antagonistic content. The term is derived from the use of the word Incendiary to describe particularly heated email discussions. Flaming is assumed to be more common today because of the ease and impersonality of email communications: confrontations in person or via telephone require direct interaction, where social norms encourage civility, whereas typing a message to another person is an indirect interaction, so civility may be forgotten.
Email bankruptcy
Also known as "email fatigue", email bankruptcy is when a user ignores a large number of email messages after falling behind in reading and answering them. The reason for falling behind is often due to information overload and a general sense there is so much information that it is not possible to read it all. As a solution, people occasionally send a boilerplate message explaining that the email inbox is being cleared out. Harvard University law professor Lawrence Lessing is credited with coining this term, but he may only have popularized it.
In business
Email was widely accepted by the business community as the first broad electronic communication medium and was the first 'e-revolution' in business communication. Email is very simple to understand and like postal mail, email solves two basic problems of communication: logistics and synchronization (see below).

LAN based email is also an emerging form of usage for business. It not only allows the business user to download mail when offline, it also allows the small business user to have multiple users' email IDs with just one email connection.
Pros
      The problem of logistics: Much of the business world relies on communications between people who are not physically in the same building, area, or even country; setting up and attending an in-person meeting, telephone call, or conference call can be inconvenient, time-consuming, and costly. Email provides a method of exchanging information between two or more people with no set-up costs and that is generally far less expensive than a physical meeting or phone call.
    The problem of synchronization: With real time communication by meetings or phone calls, participants must work on the same schedule, and each participant must spend the same amount of time in the meeting or call. Email allows asynchrony: each participant may control their schedule independently.
Cons
This section possibly contains original research. Please improve it by verifying the claims made and adding inline citations. Statements consisting only of original research should be removed. Most business workers today spend from one to two hours of their working day using email: reading, ordering, sorting,'re-contextualizing' fragmented information, and writing email. The use of email is increasing worldwide: Information overload: Email is a push technology – the sender controls who receives the information. Convenient availability of mailing lists and use of "copy all" can lead to people receiving unwanted or irrelevant information of no use to them.
   Inconsistency: Email can duplicate information. This can be a problem when a large team is working on documents and information while not in constant contact with the other members of their team. Despite these disadvantages, email has become the most widely used medium of communication within the business world. A 2010 study on workplace communication by Paytronics found 83% of U.S. knowledge workers felt email was critical to their success and productivity at work.
Research on email marketing
Marketing research suggests that opt-in email marketing can be viewed as useful by consumers if it contains information such as special sales offerings and new product information. Offering interesting hyperlinks or generic information on consumer trends is less useful. This research by Martin et al. (2003) also shows that if consumers find email marketing useful, they are likely to visit a store, thereby overcoming limitations of Internet marketing such as not being able to touch or try on a product.
Mobile
Email has become widely used on smart phones. Mobile apps for email increase accessibility to the medium. While before users could only access email on computers, it is now possible for users to check their email out of the home and out of the library while on the go. Alerts can also be sent to the phone to notify them immediately of new messages. This has given email the ability to be used for more frequent communication between users and allowed them to check their email and write messages throughout the day.
It was found that US adults check their email more than they browse the web or check their Facebook accounts, making email the most popular activity for users to do on their smart phones. 78% of the respondents in the study revealed that they check their email on their phone. It was also found that 30% of consumers use only their Smartphone to check their email, and 91% were likely to check their email at least once per day on their Smartphone. However, the percentage of consumers using email on Smartphone ranges and differs dramatically across different countries. For example, in comparison to 75% of those consumers in the US who used it, only 17% in India did.
Problems
Email messages may have one or more attachments, i.e. MIME parts intended to provide copies of files. Attachments serve the purpose of delivering binary or text files of unspecified size. In principle there is no technical intrinsic restriction in the Internet Message Format, SMTP protocol or MIME limiting the size or number of attachments. In practice, however, email service providers implement various limitations on the permissible size of files or the size of an entire message.
Furthermore, due to technical reasons, often a small attachment can increase in size when sent, which can be confusing to senders when trying to assess whether they can or cannot send a file by email, and this can result in their message being rejected. As larger and larger file sizes are being created and traded, many users are either forced to upload and download their files using an FTP server, or more popularly, use online file sharing facilities or services, usually over web-friendly HTTP, in order to send and receive them.
Information overload

A December 2007 New York Times blog post described information overload as "a $650 Billion Drag on the Economy", and the New York Times reported in April 2008 that "E-MAIL has become the bane of some people's professional lives" due to information overload, yet "none of the current wave of high-profile Internet start-ups focused on email really eliminates the problem of email overload because none helps us prepare replies". GigaOm posted a similar article in September 2010, highlighting research that found 57% of knowledge workers were overwhelmed by the volume of email they received. Technology investors reflect similar concerns. In October 2010, CNN published an article titled "Happy Information Overload Day" that compiled research about email overload from IT companies and productivity experts. According to Basex, the average knowledge worker receives 93 messages per day. Subsequent studies have reported higher numbers. Marsha Egan, an email productivity expert, called email technology both a blessing and a curse in the article. She stated, "Everyone just learns that they have to have it dinging and flashing and open just in case the boss e-mails," she said. "The best gift any group can give each other is to never use e-mail urgently. If you need it within three hours, pick up the phone."
Spamming and computer viruses
The usefulness of email is being threatened by four phenomena: email bombardment, spamming, phishing, and email worms. Spamming is unsolicited commercial (or bulk) email. Because of the minuscule cost of sending email, spammers can send hundreds of millions of email messages each day over an inexpensive Internet connection. Hundreds of active spammers sending this volume of mail results in information overload for many computer users who receive voluminous unsolicited email each day. Email worms use email as a way of replicating themselves into vulnerable computers. Although the first email worm affected UNIX computers, the problem is most common today on the Microsoft Windows operating system. The combination of spam and worm programs results in users receiving a constant drizzle of junk email, which reduces the usefulness of email as a practical tool.

A number of anti-spam techniques mitigate the impact of spam. In the United States, U.S. Congress has also passed a law, the Can Spam Act of 2003, attempting to regulate such email. Australia also has very strict spam laws restricting the sending of spam from an Australian ISP,[99] but its impact has been minimal since most spam comes from regimes that seem reluctant to regulate the sending of spam.
Email spoofing
Email spoofing occurs when the email message header is designed to make the message appear to come from a known or trusted source. Email spam and phishing methods typically use spoofing to mislead the recipient about the true message origin.
Email bombing
Email bombing is the intentional sending of large volumes of messages to a target address. The overloading of the target email address can render it unusable and can even cause the mail server to crash.
Privacy concerns
Today it can be important to distinguish between Internet and internal email systems. Internet email may travel and be stored on networks and computers without the sender's or the recipient's control. During the transit time it is possible that third parties read or even modify the content. Internal mail systems, in which the information never leaves the organizational network, may be more secure, although information technology personnel and others whose function may involve monitoring or managing may be accessing the email of other employees.
Email privacy, without some security precautions, can be compromised because:

Email messages are generally not encrypted.
Email messages have to go through intermediate computers before reaching their destination, meaning it is relatively easy for others to intercept and read messages.
Many Internet Service Providers (ISP) store copies of email messages on their mail servers before they are delivered. The backups of these can remain for up to several months on their server, despite deletion from the mailbox.
The "Received:"-fields and other information in the email can often identify the sender, preventing anonymous communication.

There are cryptography applications that can serve as a remedy to one or more of the above. For example, Virtual Private Networks or the Tor anonymity network can be used to encrypt traffic from the user machine to a safer network while GPG, PGP, SMEmail, or S/MIME can be used for end-to-end message encryption, and SMTP STARTTLS or SMTP over Transport Layer Security/Secure Sockets Layer can be used to encrypt communications for a single mail hop between the SMTP client and the SMTP server.

Additionally, many mail user agents do not protect logins and passwords, making them easy to intercept by an attacker. Encrypted authentication schemes such as SASL prevent this.

Finally, attached files share many of the same hazards as those found in peer-to-peer file sharing. Attached files may contain Trojans or viruses.

Tracking of sent mail

The original SMTP mail service provides limited mechanisms for tracking a transmitted message, and none for verifying that it has been delivered or read. It requires that each mail server must either deliver it onward or return a failure notice (bounce message), but both software bugs and system failures can cause messages to be lost. To remedy this, the IETF introduced Delivery Status Notifications (delivery receipts) and Message Disposition Notifications (return receipts); however, these are not universally deployed in production.  A complete Message Tracking mechanism was also defined, but it never gained traction; see RFCs 3885 through 3888.

0 comments:

Post a Comment